Lucent Technologies 8.2 User Manual
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
802
Locations
17
Locations
Use the Locations screen to provide daylight savings time displays to users, to set
the area code for each location, and to administer different location information
for multiple switches. You can administer up to 44 location specifications
depending on the configuration of your switch if the Multiple Locations field is y
on the System Parameters Customer Options screen. Otherwise, information for
location 1 applies to all your switches.
the area code for each location, and to administer different location information
for multiple switches. You can administer up to 44 location specifications
depending on the configuration of your switch if the Multiple Locations field is y
on the System Parameters Customer Options screen. Otherwise, information for
location 1 applies to all your switches.
Screen 157.
Locations
ARS Prefix 1 Required for 10-Digit NANP Calls?
Number
Displays the location number (
1
to
44
). Corresponding entries in each row define
the numbering plan and daylight savings rule for each location number.
Valid entries Usage
y/n
Enter y when a 1 must be dialed before all 10-digit NANP calls.
change locations
Page 1 of 3
LOCATIONS
ARS Prefix 1 Required for 10-Digit NANP Calls? _
Number
Name
Timezone
Daylight-Savings
Number Plan
Offset Rule
Area
Code
1
____________________
_ __:__
__
___
2
____________________
_ __:__
__
___
3
____________________
_ __:__
__
___
4
____________________
_ __:__
__
___
5
____________________
_ __:__
__
___
6
____________________
_ __:__
__
___
7
____________________
_ __:__
__
___
8
____________________
_ __:__
__
___
9
____________________
_ __:__
__
___
10
____________________
_ __:__
__
___
11
____________________
_ __:__
__
___
12
____________________
_ __:__
__
___
13
____________________
_ __:__
__
___
14
____________________
_ __:__
__
___