Lucent Technologies 8.2 User Manual
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
826
Multifrequency-Signaling-Related System Parameters
17
Test Call Extension
Interdigit Timer (sec)
Specify the maximum number of seconds the switch will wait for the first forward
signal (digit) to arrive, and for subsequent digits to arrive. Intercept returns to the
calling party if this timer expires.
signal (digit) to arrive, and for subsequent digits to arrive. Intercept returns to the
calling party if this timer expires.
Maximum Resent Requests
Received Signal Gain (-Loss) (dB)
Transmitted Signal Gain (-Loss) (dB)
Valid entries
Usage
An unassigned extension Specifies the destination of a call between the CO and
the PBX that tests R2-MFC signaling.
1
A test call extension is the destination.
Valid entries Usage
1
to
255
This number must be less than the number of seconds entered in
the short interdigit timer.
the short interdigit timer.
Valid entries Usage
1
to
99
Enter the threshold number of resend type MFC signals your
switch accepts during an outgoing call.
switch accepts during an outgoing call.
1
The call is dropped if one resend signal is received.
blank
An unlimited number of resend requests is allowed.
Valid entries
Usage
-15
to
3
Enter the number for the loss/gain when the MFC port listens to
the trunk port. Your switch listens with a range of -5 to -35 and
this value moves the range (for example, a value of -5 provides a
range of -10 to -40).
the trunk port. Your switch listens with a range of -5 to -35 and
this value moves the range (for example, a value of -5 provides a
range of -10 to -40).
Valid entries Usage
-15
to
3
Enter the number for the loss/gain when the trunk port listens to
the MFC port. The MFC port generates at -5 for MFC and -8 for
MFE, and this field adds gain or loss to the starting value of -5.
the MFC port. The MFC port generates at -5 for MFC and -8 for
MFE, and this field adds gain or loss to the starting value of -5.