Lucent Technologies 8.2 User Manual

Issue 1

April 2000

Screen reference 

963

Time of Day Routing Plan 

A display-only field when the screen is accessed using an administration 
command. Specifies the Time of Day Coverage Table number. Up to 999 can be 
administered.

Specify the activation time of the coverage path administered in the next CVG 
PATH field. Enter the information in 24-hour time format.

Enter the coverage path number.

Use this screen to set up Time of Day Routing Plans. You can route AAR and 
ARS calls based on the time of day each call is made. You can design up to 8 Time 
of Day Routing Plans, each scheduled to change up to 6 times a day for each day 
in the week.

Match the Time of Day Routing Plan PGN# with the PGN# field on the Partition 
Routing Table for the route pattern you want to use.

Automatic Route Selection (ARS) or Private Networking, AAR/ARS 
Partitioning, and Time of Day Routing must be enabled on the 

 to 

If there are time gaps in the table, there will be no coverage 
path in effect during those periods. The first activation time for 
a day is set to 00:00 and cannot be changed. Activation times 
for a day must be in ascending order from left to right.

 through 

For the G3r configurations

 through 

For the G3si configurations