Lucent Technologies 8.2 User Manual

Page of 1707
DEFINITY ECS Release 8.2
Administrator’s Guide  
555-233-506  
Issue 1
April 2000
Screen reference 
972
Trunk Group 
17
Tip:
Remember that facility restriction levels (FRL) are assigned to classes of 
restriction. Even if 2 trunk groups have classes of restriction that allow a 
connection, different facility restriction levels may prevent operations such 
as off-net call forwarding or outgoing calls by remote access users.
TN
Tip:
Double-check your entry. If you accidentally enter an unassigned tenant 
partition number, the system will accept the entry but no calls will go to the 
trunk group.
TAC
Enter the trunk access code (TAC) that must be dialed to access the trunk group. A 
different TAC must be assigned to each trunk group. CDR reports use the TAC to 
identify each trunk group. 
CO Type
This field appears when the Country field is 14 and is used only by trunk group 
members administered on a TN464D vintage 2 or later DS1 circuit pack.
Valid entries
Usage
1
 to 
20 
(G3si/csi)
Enter a Tenant Partition number to assign this trunk group to 
the partition.
1
 to 
100 
(G3r)
Valid entries
Usage
1-4 digit 
number
Enter any number that fits the format for trunk access codes or 
dial access codes defined in your dial plan.
*, #
* and # may be used as the first character in a TAC.
Valid entries
Usage
analog
 
This field specifies whether the trunk group is connected to 
analog or digital facilities at the central office.
digital