Lucent Technologies 8.2 User Manual
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
666
Feature-Related System Parameters
17
Pull Transfer
Update Transferred Ring Pattern
Outpulse Without Tone
Wait Answer Supervision Timer
Refer to
Unanswered DID Call Timer (seconds)
for more information.
Valid entries
Usage
y/n
Enter
y
to enable the
Pull Transfer
feature on a system-wide
basis. This allows either the transferring or transferred-to
party to press the Transfer button to complete the transfer
operation
party to press the Transfer button to complete the transfer
operation
Valid entries
Usage
y/n
Enter
y
to change the ringing pattern from internal to external
when an internal station transfers an external call. If most of
your calls go through an attendant, you might want to set this to
your calls go through an attendant, you might want to set this to
y
, so your users will be able to distinguish an external call.
Valid entries
Usage
y
Enter
y
to indicate the switch will outpulse digits even when a
dial tone has not been received.
n
Enter “
n
” if the calling party should receive intercept tone if
no dial tone is detected.
Valid entries
Usage
y
Enter
y
to enable this feature on a systemwide basis. When
y
is
entered in this field, calls to stations unanswered after 50
seconds are dropped.
seconds are dropped.
n
When
n
is entered in this field, unanswered calls drop only
when the calling party goes on-hook.