TP-LINK TL-SC3430 User Manual
53
z
The Operator mode can not only view the Live View but also control the PTZ (only for PTZ
models).
models).
z
The Viewer mode only can view the Live View.
¾
Viewer Authentication: Select whether the authentication is needed when users access to live
view.
view.
z
On: Authentication is required to let different users have different levels of permission to
access the camera view.
access the camera view.
z
Off: Authentication is not required to access the camera. Check Off and select one (among
Admin, Operator and Viewer) from the pull-down list as the permission, then all users can
view directly the video with the default permission without entering username and password.
* If you want to have a higher authority than the default, you can key in appropriate
username and password in the diag box that pops up when performing advanced operations
that are only allowed by the higher authority.
Admin, Operator and Viewer) from the pull-down list as the permission, then all users can
view directly the video with the default permission without entering username and password.
* If you want to have a higher authority than the default, you can key in appropriate
username and password in the diag box that pops up when performing advanced operations
that are only allowed by the higher authority.
7.4.2 HTTPS
HTTPS is a URL scheme used to indicate a secure HTTP connection. It is syntactically identical to the
http://
scheme normally used for accessing resources using HTTP. Using an
https:
//URL/ with a
different default TCP port (443) and an additional encryption/authentication layer between the HTTP and
TCP. You can use the IP camera through HTTPS easily by using https:// instead of http://.
TCP. You can use the IP camera through HTTPS easily by using https:// instead of http://.
¾
Create & Install: Create a self-signed certificate for HTTPS to recognize.
¾
Installed Certificate: Display or remove the properties of the installed certificate.
¾
HTTPS Connection Policy: Set HTTPS connection policy for different level of users.
¾
To use the HTTPS encryption, please set up “Create self-signed certificate” for the first time
you use the HTTPS function, and then set up the connection policy for different users.
you use the HTTPS function, and then set up the connection policy for different users.