Lucent Technologies Release 7 User Manual
DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-306
BRI-PORT (ISDN-BRI Port), ABRI-PORT (ASAI ISDN-BRI Port)]
9
BRI-PORT (ISDN-BRI Port),
ABRI-PORT (ASAI ISDN-BRI Port)]
ABRI-PORT (ASAI ISDN-BRI Port)]
NOTE:
Some of the information in this section is reserved for future use.
!
CAUTION:
for isolating and resolving
Packet Bus faults is included in
Chapter 5, ‘‘Alarms, Errors, and
Troubleshooting’’
. This flowchart, along with the other information presented
in the chapter, can help resolve problems that involve more than a single
station or circuit pack. Refer to this section whenever the repair procedures
for this Maintenance Object refer to Packet Bus and/or Packet Control
maintenance.
station or circuit pack. Refer to this section whenever the repair procedures
for this Maintenance Object refer to Packet Bus and/or Packet Control
maintenance.
MO Name (in
Alarm Log)
Alarm Level
InitialCommand to
Run
1
1.
UU is the universal cabinet number (1 for PPN, 2 -44 for EPNs). C is the carrier designation (A, B,
C, D, or E). SS is the number of the slot in which the circuit pack resides (01 to 21). pp is the two
digit port number (01, 02, ...).
C, D, or E). SS is the number of the slot in which the circuit pack resides (01 to 21). pp is the two
digit port number (01, 02, ...).
Full Name of MO
BRI-PORT
MINOR
test port PCSSpp l
ISDN-BRI Port
BRI-PORT
WARNING
test port PCSSpp sh
ISDN-BRI Port
ABRI-PORT
MAJOR
2
,
3
2.
The alarm level for ASAI and Lucent adjunct ports may be administered using the set options
command. The alarm level can be set independently for Off-Board and On-Board alarms to
WARNING, MINOR, or MAJOR for all ASAI and Lucent adjunct ports in the system.
command. The alarm level can be set independently for Off-Board and On-Board alarms to
WARNING, MINOR, or MAJOR for all ASAI and Lucent adjunct ports in the system.
3.
All alarming for an ASAI and Lucent adjunct and OFF-BOARD alarming for an ASAI or Lucent port
is disabled if the ASAI or Lucent adjunct asks the switch to suspend maintenance. When this
occurs, an error and a WARNING alarm is logged against the ASAI or Lucent adjunct. The
Hardware Error and Alarm Logs should be checked to see if the adjunct has disabled alarming.
is disabled if the ASAI or Lucent adjunct asks the switch to suspend maintenance. When this
occurs, an error and a WARNING alarm is logged against the ASAI or Lucent adjunct. The
Hardware Error and Alarm Logs should be checked to see if the adjunct has disabled alarming.
test port PCSSpp l
ASAI ISDN-BRI Port
ABRI-PORT
WARNING
2
,
3
test port PCSSpp l
ASAI ISDN-BRI Port
ATT-PORT
MAJOR
2
,
3
test port PCSSpp l
Lucent Adjunct
ISDN-BRI Port
ISDN-BRI Port
ATT-PORT
WARNING
2
,
3
test port PCSSpp l
Lucent Adjunct
ISDN-BRI Port
ISDN-BRI Port
LGATE-PT
MAJOR
2
,
3
test port PCSSpp l
Ethernet ASAI Port
LGATE-PT
WARNING
2
,
3
test port PCSSpp l
Ethernet ASAI Port
ATTE-PT
MAJOR
2
,
3
test port PCSSpp l
Ethernet Lucent
Adjunct Port
Adjunct Port
ATTE-PT
WARNING
2
,
3
test port PCSSpp l
Ethernet Lucent
Adjunct Port
Adjunct Port