Panasonic PCF3 User Manual

Remove equipment from box, contents include:

CONTENTS INCLUDE:
     (1) Flush Mount Box

(1) Cover plate with window

     (2) Allen wrench security head tool
     (2) Stainless steel 6-32x1/2" captive Security head screws

(1) Camera mount bracket
(1) Camera mount arm
(1) Bottom mount bracket

     (2) 4-40 x 1/4" screws
     (2) Star washers
     (2) 2-56 x 3/16" Screws
     (1) Camera, lens, and PC Board

1.  Locate the area on the wall where the housing will be
     installed and cut a 2 1/4" x 3 3/4" hole into the wall.
2.  Run the necessary wiring/cables to this cutout and pull
     wiring/cables through opening.
3.  Using the security tool, loosen the 2 security head
     screws on the cover plate and remove it.
4.  Feed the wiring/cables through one or more of the
     cable entry holes in the back of the flush mount box.
5.  Install the housing into the cutout in the wall and
     tighten the Phillips head screws on the front of the
     box.  This will pull the lock tabs forward to secure
     the box to the wall.

6. Remove the top mount bracket.  This will allow you to
    remove the camera/PC Board assembly from the unit.
7. Once you have removed the camera assembly, make
    the necessary connections to the PC Board.

5. Hand place the top mount bracket and camera into the
    unit.  Check the angle of the camera, remove the
    bracket/camera and make any necessary adjustments.
    Once you have achieved the desired camera angle,
    reattach the top bracket and camera to the housing.
    Fine focusing can be achieved by manually rotating the
    lens.
6. Fine focusing (see diagram below):
    Fixed Lens:  Manually rotate the lens until a clear picture is
                         achieved.
    Vari-Focal Lens:  First, adjust the Magnification Lock Screw
                                 to the desired magnification (telephoto
                                 to wide angle).  Tighten the Lock Screw.
                                 Next, adjust the Focus Lock Screw until a
                                 clear picture is achieved.  Tighten the
                                 Lock Screw.

2 1/4"

3 3/4"

Cut Out

Lock Tab
   Screw

Lock Tab

Top Mount
Bracket

Lock Tab
   Screw

Bottom Mount
     Bracket

Manufactured by:

for

Before attempting to connect or operate this product, please read these instructions completely.

81-IN3048-9922

MODEL:  Miniature Camera

PCF3, PCV3

Camera
Mount Arm

!

Manual focus

Focus Lock Screw

Magnification
Lock Screw

DESCRIPTION:  Recessed Wall Housing, Color Camera