Panasonic KX-HCM10 User Manual
Operating Instructions
[For assistance : 1-800-272-7033]
11
1.3
Part Names
1.3.1
Front View
Information
Power LED blinks in the following states.
•
While lens moves to the Home Position after turning on the power.
•
When performing Update Firmware.
•
When you pushed CLEAR SETTING button.
•
The KX-HCM10 hardware is defective. Please refer to Section
4.2
4.2
CAUTION
•
Network Camera is intended for indoor use only. Prolonged exposure to direct
sunlight or halogen light may damage the CMOS sensor.
sunlight or halogen light may damage the CMOS sensor.
•
If you display the same image on the PC monitor for a long time, damage of
the monitor such as sticking may occur. You should use screen saver.
the monitor such as sticking may occur. You should use screen saver.
•
Do not force the movement of the camera while panning or tilting the view. This
can damage the internal drive motors.
can damage the internal drive motors.
•
Do not touch the lens. It may leave a finger print and can cause the image to
be out of focus. This can also damage the protective coating on the lens.
be out of focus. This can also damage the protective coating on the lens.
Power LED
Fixed Focus Lens
(1m - Infinity)
(1m - Infinity)