Panasonic KX-HCM10 User Manual
Operating Instructions
[For assistance : 1-800-272-7033]
67
7.
Next message is displayed between Update Firmware.
Update Firmware operation takes about 80 seconds.
And next, the screen of Restart is displayed and a Network Camera begins
Restart automatically.
And next, the screen of Restart is displayed and a Network Camera begins
Restart automatically.
Restart operation takes up to 1 minute.
Then Top Page is displayed.
Then Top Page is displayed.
CAUTION
•
Disconnect to global network during Update Firmware.
•
Never turn off the Camera power, during the Update Firmware.
•
Buffered images are erased when you execute the Update Firmware.
Reset to Factory Default
Reset to Factory Default screen allows you to reset to Factory Default.
•
It is possible to reset the parameter of Network Camera to Factory Default.
1.
Click the
button on the Network Camera Setup
Page. The next screen appears.
Information
Please check the current Update Firmware on the Setup page.
Reset to Factory Default