Panasonic KX-HCM10 User Manual
Operating Instructions
70
3.1
I/O Connector
By attaching external devices, such as a sensor, in I/O connector, images can be
transmitted at the time of alarm generating.
transmitted at the time of alarm generating.
Explanation of I/O Connector
CAUTION
•
Please keep the electric specification of each terminal as above contents,
and use it.
and use it.
•
If the current or voltage parameters mentioned above are exceeded, the
camera will sustain permanent damage.
camera will sustain permanent damage.
•
Do not connect the DC Power (pin 2) to GND (pin 1). This will short circuit
the camera's power supply and possibly damage the camera.
the camera's power supply and possibly damage the camera.
Pin
Function
1
GND
2
DC Power Output
•
DC8V - 12V
•
Maximum of 50mA load drive is possible.
3
Digital Input
•
Please use it by opening or GND short-circuit.
4
Digital Output
•
It is controllable by administrator setup. Please refer to Page 63.
•
It is an open collector circuit and the maximum drawing-in current is
50mA. Maximum voltage is DC+15V.
50mA. Maximum voltage is DC+15V.