Panasonic WV-CP500 User Manual

14

The  white  balance  is  manually  fine  adjusted  after  white  balance  automatically  adjustment  in  the  automatic  color  temperature 
tracking mode (ATW1, ATW2) or automatic white balance control mode (AWC). 
Follow the procedure below. 

Set "WHITE BAL" to "ATW1", "ATW2" or "AWC" and press the setting button. 
 

→  The fine adjustment screen appears. 

Move the cursor to "R" and "B" and use the right or left button to fine adjust the level for each. 
When the level indicator moves in the "+" direction, the color becomes deeper, and when the level indicator moves in the "–"
direction, the color becomes lighter. 

The digital noise reduction function reduces noise automatically under the condition of low illuminance. 
The effect level of the noise reduction function is selectable from the following: 
LOW: Low level of noise reduction (small residual image).
HIGH (default): High level of noise reduction (large residual image).

The settings relating to the black-and-white mode can be configured. Follow the procedure below. 

 •  When "BW" is set for "ALARM IN", the "EXT" indication will be displayed for "BM MODE" and it is impossible to change the

setting. (+ Page 23)

     

"BW MODE" screen

"CAMERA SETUP" screen

Fine adjustment screen

"CAMERA SETUP" screen