Panasonic WV-CP500 User Manual

14. Electronic zoom setting [EL-ZOOM]

Select "On" or "Off" to determine whether or not to use the electronic zoom.
When "ON" is selected, the zoom factor and the panning/tilting settings can be configured.
ON: Uses the electronic zoom.
OFF (default): Does not use the electronic zoom.
Follow the procedure below.

Step 1

Move the cursor to "EL-ZOOM", select "ON" and press the setting button.

→ The "EL-ZOOM" screen will be displayed.

Step 2

Move the cursor to "PUSH SW" of "ZOOM" and press the setting button.

→ The zoom setting screen appears.

Step 3

Adjust the angular field of view by changing the electronic zoom factor (up to 2x) using the up or down button.

Note:

• When the zoom factor is incremented, resolution will be deteriorated.

Step 4

Move the cursor to "PUSH SW" of "PAN/TILT" and press the setting button.

→ The pan/tilt setting screen appears.

Step 5

Use the up, down, right, and left buttons to determine the image position and press the setting button.
The position can be changed in the range of zoom factor set in the "EL-ZOOM" screen.

Note:

• To reset to the default, hold down the right and left buttons simultaneously for approx. 2 seconds while the zoom setting

screen or pan/tilt setting screen is displayed.

**EL-ZOOM**
ZOOM PUSH SW

PAN/TILT PUSH SW
U ZOOM D

RET TOP END

**SYSTEM SETUP**

SYNC INT

ALARM IN/OUT

PRIVACY ZONE OFF

STABILIZER OFF

EL-ZOOM ON

RET TOP END

EL-zoom setting screen

Zoom setting screen

Pan/tilt setting screen

"SYSTEM SETUP" screen

**EL-ZOOM**
ZOOM PUSH SW

PAN/TILT PUSH SW

RET TOP END

**EL-ZOOM**
ZOOM PUSH SW

PAN/TILT PUSH SW
U TILT D/L PAN R

RET TOP END