Panasonic WV-CP500 User Manual

30

Flaws in the displayed camera image are corrected. Up to 16 points can be corrected. 
Follow the procedure below.  

Move the cursor to "PIX OFF" and press the setting button. 
 

→  The "PIX OFF" screen appears. 

Select a number (1 to 16) with which a pixel compensation point is registered and press the setting button. 
 

→  The pixel compensation positioning screen appears. 

Use the up, down, right, and left buttons to move the crosshair cursor to the center of the flaw to be corrected and press the set-
ting button. 
 

→  The flaw is corrected and the pixel compensation point is registered. The "PIX OFF" screen appears again. "*" is attached at 

the right side of the number when registration is completed. The coordinate is expressed in figures. 

 •  To clear the registered pixel compensation point, move the cursor to the number with which the target pixel compensation

point  is  registered  on  the  "PIX  OFF"  screen  and  press  the  setting  button.  The  pixel  compensation  positioning  screen 
appears,  and  then  hold  down  the  right  and  left  buttons  for  more  than  2  seconds  simultaneously.  The  "PIX  OFF"  screen 
appears, the pixel compensation point is cleared, and "*" at the right side of the number disappears. 

     

"SPECIAL SETUP" screen

"PIX OFF" screen

Pixel compensation positioning screen