Panasonic WV-CP500 User Manual

8

The  following  describes  the  camera  operation  settings.  The  following  settings  can  be  configured  on  the  "CAMERA  SETUP" 
screen displayed from the top screen. 
Refer to page 5 for how to call up the screen. 
The settings configured on the "CAMERA SETUP" screen will be saved as a scene file. 

It is possible to register 2 patterns of scene file. For example, when different settings are to be applied between day and night, 
SCENE1 can be applied in the daytime and SCENE2 at night. 
Change between the scene files can be made on the ALARM IN setting or shortcut operation. (+ Pages 23 and 24)
"SCENE1" is set as the default setting. 

After confirming that "SCENE1" is selected, configure the settings of "ALC/ELC" through "i-VMD". (☞ Pages 9 - 20)
When using while changing the scene files, go to step 2. 

Move the cursor to "SCENE1" and use the right or left button to select "SCENE2". 
 

→  The "COPY(SCENE1)" screen will be displayed. 

To  configure  the  settings  of  "SCENE2"  using  the  settings  of  "SCENE1",  press  the  setting  button  after  moving  the  cursor  to 
"COPY(SCENE1)". 
 

→  The settings of "SCENE1" will be copied to "SCENE2". 

Edit the settings to be changed and saved as the settings of "SCENE2". 
The number displayed at the right side of the title on each setting screen 
inidicates a scene file number. 

     

q

  w

e

  r

t

  y

u

  i

o

"CAMERA SETUP" screen

Screen when "SCENE1" is selected

Screen when "SCENE2" is selected

Scene file 

number