Panasonic WV-NW474SE User Manual

Opening the camera setup menu

■ Camera Setup Menu (CAM

You can assign a name to the camera.  The camera ID
consists of up to 16 alphanumeric characters.  The
camera ID display can be switched on and off on the
monitor screen.

-22-

The following pages describe setting operations from the camera. 
For accessing from the PC, interpret these instructions as follows.

Escaping from the VMD mask setup
etc.

Function

Closing the camera setup menu

Opening a more detailed setup
menu

Returning to the previous menu

Opening the special menu

Resetting the parameter of an item

Resetting all the settings

Selecting an item

Selecting a parameter

Validating the selection

Hold down the [SET] button for 2 seconds.

Press the [SET] button while the cursor is
at END.

Press the [SET] button while the cursor is
at an item tailed with 

O mark.

Press the [SET] button while the cursor is
at RET.

Hold down the [Left] and [Right] buttons
simultaneously while the cursor is at END
in CAM SETUP.
Hold down the [Left] and [Right] buttons
simultaneously while the cursor is at the
item.
Hold down the [Left], [Right], and [SET]
buttons simultaneously while the cursor is
at CAMERA RESET.
Press the [Up] or [Down] button.

Press the [Left] and [Right] button.

Press the [SET] button.

Hold down the [SET] button for 2 seconds.

Click the Camera Setup button in the
main page to display the menu control
buttons.
Click the [MENU ON] button.
Click the [MENU OFF] button.

Click the [SET] button while the cursor is
at the item tailed with 

O mark.

Click the [SET] button while the cursor is
at RET or simply clock the [ESC] button.

Click the [RESET/SPECIAL] button while
the cursor is at END in CAM SETUP.

Click the [RESET/SPECIAL] button while
the cursor is at the item.

Click the [ALL RESET] button while the
cursor is at CAMERA RESET.

Click the [D] or [C] button.

Click the [A] or [B] button.
Click the [SET] button.

Click the [ESC] button.

From the Camera

From the PC

■ Setup Selection

1. Move the cursor to CAMERA or NETWORK, and

press [SET] to open the desired setup menu.
CAMERA

N: Opens the CAMERA SETUP menu.

N: Opens the NETWORK SETUP menu.

2. Move the cursor to END, and press [SET] to return

to camera image screen.
Note: When SETUP DISABLE appears in the bot-

tom line you cannot change the currently active
settings. This disablement is designed to pre-
vent accidental setting change. Refer to the pre-
vious page to change it to ENABLE.

↵

↵

Character Cursor

Cursor

Character

Area

Command

Editing

Area

CAMERA ID menu

↵

↵↵