Panasonic WV-CS574 User Manual

■

●

Move the cursor to CAMERA 

O, and press the CAM

(SET) button. The camera setting menu appears.

●

1. Move the cursor to CAMERA ID, and select ON to

display the camera identification with the joystick.

2. Follow the steps below to edit the camera ID char-

acters.

2-1 Move the cursor to CAMERA ID and press the

CAM (SET) button to display the character edit-
ing menu.

2-2 Move the cursor to the character you want to edit

or change with the joystick, and press the CAM
(SET) button. The selected character appears in
the editing area.

2-3 Repeat the steps above until all characters are

edited.

3. After editing the camera identification characters,

follow the steps below to decide the position of
CAMERA ID.

3-1 Move the cursor to POSI, and press the CAM

(SET) button to display the ID position menu. 

-42-

●

The camera picture remains as a still image on the
monitor screen until the camera reaches the preset
position. This function is useful for surveillance via local
area network.

1. Move the cursor to IMAGE HOLD and select ON or

OFF.

The last displayed still image is shown till the

camera finishes moving to a preset position.
However, the still image may be distorted with
the effect of panning or tilting.

The current image is being displayed while the

camera is moving to a preset position.

●

You can select the tilting range.

1. Move the cursor to TILT ANGLE and select 0 ° or 5 °.

The tilting range is between 0 ° and 180 °.

The tilting range is between –5 ° and 185 °.

When 5 ° is selected in the WIDE mode, a sub-
ject is not displayed on approximately the upper
half of the screen or the screen becomes white
for some subjects due to the AGC effect.

°

°