Panasonic WV-NS202A User Manual
63
Configure the settings relating to the authentication
[Authentication setup]
[Authentication setup]
The settings relating to the authentication such as users and PCs restrictions for accessing the camera can be con-
figured on this page.
The "Authentication setup" page has 2 tabs of the [User] tab and the [Host] tab.
figured on this page.
The "Authentication setup" page has 2 tabs of the [User] tab and the [Host] tab.
Configure the settings relating to the user authentication [User]
Click the [User] tab on the "Authentication setup" page. (
☞ pages 20 and 21: How to display/operate the setup
menu)
The settings relating to the user authentication can be configured on this page. Up to 16 users can be registered.
The settings relating to the user authentication can be configured on this page. Up to 16 users can be registered.
Note:
When user authentication (authentication error) has failed to pass 8 times within 30 seconds using the same IP
address (PC), access to the camera will be denied for a while.
address (PC), access to the camera will be denied for a while.
[User authentication]
Select "ON" or "OFF" to determine whether or not to
authenticate the users.
Default: OFF
Select "ON" or "OFF" to determine whether or not to
authenticate the users.
Default: OFF
[User name]
Enter a user name.
Number of characters for the user name: 1 - 32 char-
Enter a user name.
Number of characters for the user name: 1 - 32 char-
acters
Default: None (blank)
[Password] [Retype password]
Enter the password.
Number of characters for the password: 4 - 32 char-
Enter the password.
Number of characters for the password: 4 - 32 char-
acters
Default: None (blank)
Note:
When the user name already in use is entered and
the [SET] button is clicked, the respective user infor-
mation will be overwritten.
the [SET] button is clicked, the respective user infor-
mation will be overwritten.
[Access level]
Select the access level of the user from the following.
1. Administrator: Allowed all available operations of
Select the access level of the user from the following.
1. Administrator: Allowed all available operations of
the camera.
2. Camera control: Allowed to display images from the
camera and to control the camera. The camera set-
ting configuration is unavailable.
ting configuration is unavailable.
3. Live only: Only displaying live images is available.
The camera setting configuration and camera con-
trol are unavailable.
trol are unavailable.
Default: 3. Live only
Note:
By clicking [i] of "User name check", the registered
user can be selected and the selected user’s infor-
mation can be checked.
The registered user will be displayed with the access
level. (Example: admin [1])
To delete the registered user, click the [DEL] button
after selecting the user to be deleted.
user can be selected and the selected user’s infor-
mation can be checked.
The registered user will be displayed with the access
level. (Example: admin [1])
To delete the registered user, click the [DEL] button
after selecting the user to be deleted.
Important:
If all users whose access level is "1. Administrator"
are deleted, it will be impossible to configure the set-
tings.
are deleted, it will be impossible to configure the set-
tings.