Panasonic WV-SP102E User Manual
20
20
21
[Image quality]
Specify the image quality of JPEG images.
0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low
Default: 5 Normal
Specify the image quality of JPEG images.
0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low
Default: 5 Normal
Configure the settings relating to H.264 images [JPEG/H.264]
Click the [JPEG/H.24] tab on the "Image" page. (☞ Pages 13 and 14: How to display/operate the setup menu)
Configure the settings relating to H.264 image such as "Max bit rate (per client)*", "Image capture size", "Image
quality", etc. in this section.
Refer to page 19 for further information about the settings relating to JPEG images.
Configure the settings relating to H.264 image such as "Max bit rate (per client)*", "Image capture size", "Image
quality", etc. in this section.
Refer to page 19 for further information about the settings relating to JPEG images.
■
H.264 (1) · H.264 (2)
[H.264 transmission]
Select "On" or "Off" to determine whether or not to
transmit H.264 images.
On: Transmits H.264 images.
Off: Does not transmit H.264 images.
Default: On
Select "On" or "Off" to determine whether or not to
transmit H.264 images.
On: Transmits H.264 images.
Off: Does not transmit H.264 images.
Default: On
Note:
• When "On" is selected for "H.264 transmission" in
"H.264(1)", displaying of H.264 images or JPEG
images on the "Live" page will be available.
images on the "Live" page will be available.
• When "On" is selected for "H.264 transmission" in
"H.264(1)" and "H.264(2)", H.264 images are view-
able using other devices with each setting.
able using other devices with each setting.
• When "On" is selected for "H.264 transmission" in
"H.264(1)" or "H.264(2)", the transmission interval of
JPEG images may sometimes become longer.
JPEG images may sometimes become longer.
[Internet mode (over HTTP)]
Select "On" when transmitting H.264 images via the
Internet. It is possible to transmit H.264 images without
changing the broadband router settings configured for
JPEG image transmission.
On: H.264 images will be transmitted using the HTTP
port. Refer to page 45 for further information about
the HTTP port number settings.
the HTTP port number settings.
Off: H.264 images will be transmitted using the UDP
port.
Default: Off