Panasonic WV-SP102E User Manual

36

36

37

Click the [Notification] tab on the "Alarm" page. (☞ Pages 13 and 14: How to display/operate the setup menu)
The settings relating to the alarm mail can be configured. It is necessary to configure the settings of the mail server 
to perform the mail notification. (☞ Page 41)

■

[Mail server >>]
When "Mail server >>" is clicked, the [Mail] tab of the 
"Server" page will be displayed. (☞ Page 41)

[Mail notification]
Select "On" or "Off" to determine whether or not to pro-
vide notification by e-mail according to the settings for 
the "Alarm" and "Diag." checkboxes of "Destination of 
notification" below. 
Default: Off

[Alarm image attachment]
Select "On" or "Off" to determine whether or not to
attach an image to the mail to be sent. 
Default: Off

 •  The settings for "Image capture size" of the "Alarm

image" section on the [Alarm] tab (☞ page 32) will 
be applied to the size of the image to be attached. 

■

[Address 1] to [Address 4]
Enter the destination mail address. Up to 4 destination 
addresses can be registered. 
"Alarm" checkbox: When the checkbox is checked, 

the mail notification will be performed upon an 
alarm occurrence. 

"Destination address": Enter the destination address. 

To delete the registered address, click the [Delete] 
button respective to the desired address. 

Available number of characters: 3 - 128 characters

[Mail subject]
Enter the mail subject. 
Available number of characters: 0 - 50 characters

[Mail body]
Enter the mail body.
Available number of characters: 0 - 200 characters