Panasonic WV-SP102E User Manual

44

44

45

■

[DHCP]
Select "On" or "Off" to determine whether or not to use
the DHCP function. 
Configure the DHCP server not to assign the same IP 
addresses used for the other network cameras and PCs 
whose IP address is unique. Refer to the network 
administrator for further information about the settings 
of the server. 
Default: Off
     

The network settings and the settings relating to DDNS (Dynamic DNS) and SNMP (Simple Network management 
Protocol) can be configured on the "Network" page. 
The "Network" page has 4 tabs; the [Network] tab, the [DDNS] tab, the [SNMP] tab and the [FTP img. trans.] tab.

Click the [Network] tab on the "Network" page. (☞ Pages 13 and 14: How to display/operate the setup menu)
The following information is required to configure the network settings. 
Contact the network administrator or your Internet service provider. 
 •  IP address
 •  Subnet mask
 •  Default gateway (when using the gateway server/router)
 •  HTTP port
 •  Primary DNS address, Secondary DNS address (when using DNS)
     

[IP address(IPv4)]
When not using the DHCP function, enter the IP 
address of the camera. Do not enter an IP address 
already in use (for the PCs and the other network cam-
eras). 
Default: 192.168.0.10

 •  Multiple IP addresses are unavailable even when

using the DHCP function. Refer to the network 
administrator for further information about the set-
tings of the DHCP server. 

 
[Subnet mask]
When not using the DHCP function, enter the subnet 
mask of the camera. 
Default: 255.255.255.0

[Default gateway]
When not using the DHCP function, enter the Default 
gateway of the camera. 
Default: 192.168.0.1

 •  Multiple IP addresses for the default gateway are

unavailable even when using the DHCP function. 
Refer to the network administrator for further infor-
mation about the settings of the DHCP server.