Panasonic WV-SP102E User Manual
54
54
55
Upgrade the firmware [Upgrade]
Click the [Upgrade] tab of the "Maintenance" page. (☞ Pages 13 and 14: How to display/operate the setup menu)
The current firmware can be checked and upgraded to the latest version on this page. Contact the dealer for further
information about the firmware upgrade.
The current firmware can be checked and upgraded to the latest version on this page. Contact the dealer for further
information about the firmware upgrade.
[Model no.], [MAC address], [Serial no.], [Firmware
version], [IPL version], [HTML version], [IP address
(IPv6)], [Viewer software installation counter]
version], [IPL version], [HTML version], [IP address
(IPv6)], [Viewer software installation counter]
Information of each item will be displayed.
Step 1
Contact the dealer and download the latest firmware
onto a PC.
onto a PC.
Important:
• A blank (space) cannot be used for the name of the
directory where the downloaded firmware to be
saved.
saved.
Step 2
Click the [Browse...] button and designate the down-
loaded firmware.
loaded firmware.
Step 3
Click the radio button respective to the desired option
to determine whether or not to initialize the settings
after completing the firmware upgrade.
to determine whether or not to initialize the settings
after completing the firmware upgrade.
Note:
• Note that the settings cannot be restored after an
initialization is operated.
Step 4
Click the [Execute] button.
→ The confirmation window will be displayed. When
→ The confirmation window will be displayed. When
"Do not reset the settings to the default after the
upgrade." is selected, the confirmation window will
not be displayed.
upgrade." is selected, the confirmation window will
not be displayed.
Important:
• After completing the upgrade, delete temporary
internet files. (☞ Page 61)
• Upgrade the firmware using a PC in the same sub-
net as the unit.
• Follow the instructions from the dealer when
upgrading the firmware.
• Use the designated file (extension: img) for the firm-
ware upgrade.
• Use the designated file, sp105_xxxx.img, for the
firmware upgrade.
* ("xxxxx" indicates the version of the firmware.)
• Do not turn off the power of the camera during the
upgrade process.
• Do not perform any operation during upgrading and
wait until it completes.
• The following network settings will not be reset
when upgrading the firmware after selecting "Reset
the settings to the default after completing the
upgrade. (Except the network settings)".
the settings to the default after completing the
upgrade. (Except the network settings)".
On/Off for DHCP, IP address, subnet mask, default
gateway, HTTP port, line speed, bandwidth control
(bit rate), time & date
(bit rate), time & date
• The viewer software used on each PC should be
licensed individually. Refer to your dealer for the
software licensing.
software licensing.