Panasonic WV-NW484S User Manual

28

Adjust the camera angle while 

monitoring the image on the 

adjustment monitor. 

Connect the adjustment monitor 

(small LCD monitor, etc.) to the 

monitor output terminal, and adjust 

the camera angle. 

Determine and set the camera angle 

while repeating the fine-adjustments 

in steps (1), (2) and (3) below. 

(1) Loosen the pan lock screw, and 

rotate the camera horizontally to 

adjust pan. 

(2) Loosen the 2 tilt lock screws, and 

rotate the camera vertically to 

adjust tilt. 

(3) Turn the tilt adjustment seat to 

adjust the screen tilt. 

(4) When the camera angle is 

determined, tighten the pan lock 

screw and the tilt lock screws.

..............................................................................................................................

• Also adjust the focus in step 2 during pan and tilt adjustment.

...................................................................................................................................

• Be sure to tighten the panning lock screw (recommended torque: 0.59N·m {6 kgf·cm}).

(1) Pan lock screw

(2) Tilt lock screw

Monitor output connector 
(mini-jack)

75°

(3) Tilt adjustment seat

Panning table