Panasonic WV-SF438 User Manual

Note that JPEG images cannot be displayed when Quad stream (Max. 30 fps) is selected.

The type of images displayed on the “Live” page can be selected using “Image capture mode” on the [JPEG/
H.264] tab of the “Image/Audio” page of the setup menu. (

Configure the type, operation, and resolution of live images on this section.

There are 4 types of settings for Image capture mode: “1 Monitor (Max. 30 fps)”, “2 Monitor (Max. 15 fps)”,
“Quad stream (Max. 30 fps)”, and “3M Fisheye (Max. 15 fps)”. The type of images that can be displayed and
the supported mounting positions differ for each type. Check which images can be displayed in the following
table.
Refer to page 9 for further information about “Image capture mode”.
Refer to page 10 for each image.

This type transmits 1 type of
image. A maximum of 30 fps
transmissions are possible.

2M Panorama [16:9]
1M Panorama [16:9]

Panorama

wall

2M Double Panorama [16:9]
1M Double Panorama [16:9]

Double Panorama

ceiling

1.3M Fisheye [4:3]

Fisheye

ceiling, wall

1.3M Quad PTZ [4:3]

Quad PTZ

ceiling, wall

1.3M Single PTZ [4:3]

Single PTZ

ceiling, wall

This type transmits 2 types of
images. A maximum of 15
fps transmissions are
possible.

Panorama + Quad PTZ

Panorama, Quad
PTZ

wall

Panorama + Single PTZ

Panorama, Single
PTZ

wall

Double Panorama + Quad
PTZ

Double Panorama,
Quad PTZ

ceiling

Double Panorama + Single
PTZ

Double Panorama,
Single PTZ

ceiling

This type transmits 4 types of
VGA images with H.264.

VGA Quad streams [4:3]

Quad stream

ceiling

3M Fisheye [4:3]

Fisheye

ceiling, wall

The following types of images can be transmitted by each “Image capture mode” setting.

Operating Instructions

9