Panasonic WV-NS324 User Manual
-51-
■
Auto Pan Setting
Click the [Camera] button in the Setup menu, and then
click the [Auto Pan] button.
click the [Auto Pan] button.
START POINT:
1. Take the viewpoint as START POINT by press-
ing the joystick oval button, and adjust ZOOM,
FOCUS and IRIS by pressing the respective
function buttons.
FOCUS and IRIS by pressing the respective
function buttons.
2. Click the [START POINT] button to assign the
starting position.
END POINT:
1. Take the viewpoint as END POINT by pressing
the joystick oval button, and adjust
ZOOM, FOCUS and IRIS by pressing the
respective function buttons.
ZOOM, FOCUS and IRIS by pressing the
respective function buttons.
2. Click the [END POINT] button to assign the
starting position.
AUTO PAN:
[ON/OFF] button for confirmation
REVERSE:
Set positions from end to start in
reverse order.
■
Preset Setup
You can preset up to 16 viewpoint positions.
1. Click the [Camera] button in the Setup menu, and
then click the [Preset] button.
2. Adjust the angle of view in the same manner as
described for Camera Control.
3. Click the [PROGRAM] button; this registers the
viewpoint as a Preset.
4. Repeat the above steps after selecting a program
number if necessary.
PROGRAM:
1 to 16 selectable
CALL:
1 to 16 selectable
Select a number and click the [CALL] button; this
changes the viewpoint to the position correspon-
ding to the number you selected.
changes the viewpoint to the position correspon-
ding to the number you selected.