Panasonic WV-SF538E User Manual

To delete the VMD area, click the [Delete] button corresponding to the area to be deleted.

→

The outline of the respective VMD area will disappear.

Click the [Set] button.

→

The edited settings will be applied.

Click the [Notification] tab on the “Alarm” page. (

®page 46, page 48)

The settings relating to the alarm E-mail can be configured. It is necessary to configure the settings of the
E-mail server to perform the E-mail notification. (

®page 143)

When “E-mail server >>” is clicked, the [E-mail] tab of the “Server” page will be displayed. (

®page 143)

Select “On” or “Off” to determine whether or not to provide notification by E-mail according to the settings for
the “Alarm” and “Diag.” checkboxes of “Destination of notification” below.

–

When an alarm is detected (“Alarm”)

SW559

SW559

 

SP509

SP509

 

SF549

SF549

 

SF539

SF539

:

–

When a notification of the remaining capacity of the SD memory card has been provided (“Diag.”)

–

When the SD memory card has become full (“Diag.”)

–

When the SD memory card cannot be recognized (“Diag.”)

•

Default: Off

124

Operating Instructions