Panasonic WV-NW502S User Manual
22
Important:
• When mounting the camera body, cables
shall be run between the camera attach-
ment and camera mount bracket as indi-
cated by the arrow in the illustration.
ment and camera mount bracket as indi-
cated by the arrow in the illustration.
* Cable running as indicated by the arrow
is an example. Cable running shall be
varied with installation environment.
varied with installation environment.
w Engage the rear-side screw of the cam-
era with the screw hole of the camera
attachment and rotate the camera in the
direction of the arrow to secure the cam-
era to the camera attachment.
Confirm that the embossed part of the
camera attachment is set in the "LOCK"
position.
attachment and rotate the camera in the
direction of the arrow to secure the cam-
era to the camera attachment.
Confirm that the embossed part of the
camera attachment is set in the "LOCK"
position.
e Connect the cables at the side of the
mount bracket. (
☞ page 29)
Waterproof the connecting portion.
(
(
☞ page 32)
Note:
• Disconnect the 12 V power source and
PoE power source to prevent power from
being supplied during mounting work.
being supplied during mounting work.
LO
CK
OP
EN
LO
CK
O
PEN
Projection
LOCK
O
PE
N
LOCK
OPEN
Protrusion
Make cable
connections.
connections.