Panasonic WV-CL934 User Manual

Page of 56
48
Chroma phase level (hue) adjustment [HUE]
Use the right or left button to adjust the hue of the camera image. Be sure to view a vector
chromaticity indicator or a color video monitor when the adjustment is performed.
Note: 
Holding down the right and left buttons for more than 2 seconds simultaneously restores
the settings of “CHROMA GAIN”, “AP GAIN”, “PEDESTAL”, and “HUE” to the default set-
tings.
Pixel compensation [PIX OFF] 
Flaws in the displayed camera image are corrected, which is called pixel compensation. Up to
16 points can be corrected. Follow the procedure below to perform pixel compensation.
   **SPECIAL SETUP**
CHROMA GAIN   ...
|
...128
AP GAIN       ...
|
...128
PEDESTAL      ...
|
...128
HUE           ...
|
...128
              -     +
PIX OFF
COMMUNICATION COAX
CAMERA RESET  PUSH SW
 SER.NO. XXXXXXXX
 RET TOP END
      **PIX OFF**
  1     2     3     4   
  5     6     7     8
  9    10    11    12
 13    14    15    16
 000 000
 RET TOP END
"SPECIAL SETUP" screen
"PIX OFF" screen
Pixel compensation
positioning screen
Step 1
Move the cursor to "PIX OFF" and press the setting button. 
→ The "PIX OFF" screen appears. 
Step 2
Select a number (1 to 16) with which a pixel compensation point is registered and press the
setting button. 
→ The pixel compensation positioning screen appears.
Step 3
Use the up, down, right, and left buttons to move the crosshair cursor to the center of the flaw
to be corrected and press the setting button. 
→ The flaw is corrected and the pixel compensation point is registered. The "PIX OFF" screen
appears again. "
*
" is attached at the right side of the number when registration is complet-
ed. The coordinate is expressed in figures.