Panasonic WV-CL934 User Manual
40
9. Digital noise reduction function setting [DNR]
The digital noise reduction function reduces noise automatically under the condition of low illu-
minance. The effect level of the noise reduction function is selectable from the following:
LOW: Low level of noise reduction (small residual image)
MID: Medium level of noise reduction (medium residual image)
HIGH (default): High level of noise reduction (large residual image)
minance. The effect level of the noise reduction function is selectable from the following:
LOW: Low level of noise reduction (small residual image)
MID: Medium level of noise reduction (medium residual image)
HIGH (default): High level of noise reduction (large residual image)
10. Image resolution setting [RESOLUTION]
A resolution of camera images is selectable from the following:
NORMAL: Horizontal resolution of 480 TV lines or more
HIGH (default): Horizontal resolution of 540 TV lines typ.
NORMAL: Horizontal resolution of 480 TV lines or more
HIGH (default): Horizontal resolution of 540 TV lines typ.
Note:
When the electronic sensitivity enhancement function, "SENS UP", is activated under the
condition that "HIGH" is selected, noise may increase.
condition that "HIGH" is selected, noise may increase.
11. Settings in black-and-white mode [BW MODE]
The settings regarding the black-and-white mode are performed.
Follow the procedure below for settings regarding the black-and-white mode.
Follow the procedure below for settings regarding the black-and-white mode.
**CAMERA SETUP** 1/2
CAMERA ID OFF
ALC/ELC ALC
SHUTTER OFF
AGC ON
SENS UP OFF
SYNC INT
WHITE BAL ATW1
MOTION DET OFF
DNR HIGH
RESOLUTION HIGH
BW MODE
CAMERA ID OFF
ALC/ELC ALC
SHUTTER OFF
AGC ON
SENS UP OFF
SYNC INT
WHITE BAL ATW1
MOTION DET OFF
DNR HIGH
RESOLUTION HIGH
BW MODE
**BW MODE**
BW OFF
BW OFF
BURST(BW) ON
RET TOP END
**BW MODE**
BW AUTO1
LEVEL HIGH
DURATION TIME .|..
S L
BW AUTO1
LEVEL HIGH
DURATION TIME .|..
S L
BURST(BW) ON
RET TOP END
"CAMERA SETUP" screen
"BW MODE" screen
"BW MODE" screen
Step 1
Move the cursor to "BW MODE" and press
the setting button.
the setting button.
→ The "BW MODE" screen appears.
Step 2
Move the cursor to "BW" and select the
black-and-white control from the following:
black-and-white control from the following:
AUTO1: Automatically toggles between color
and black-and-white images in accor-
dance with the screen brightness (illumi-
nance). The black-and-white mode is
selected for dark images, and the color
mode is selected for bright images.
dance with the screen brightness (illumi-
nance). The black-and-white mode is
selected for dark images, and the color
mode is selected for bright images.
AUTO2: Uses a near-infrared light source at
nighttime.
EXT:
Is selected to control switching
between color and black-and-white
images after connecting an external
device to the external terminal (DAY/
NIGHT). (
images after connecting an external
device to the external terminal (DAY/
NIGHT). (
☞ page 18)