Panasonic WV-SW458 User Manual

Page of 44
12
Code label
The code labels (accessory) are required at 
inquiry for trouble. Use caution not to lose 
these labels. It is recommended to paste one 
of the labels onto the CD-ROM case.
Discoloration on the color filter of the 
MOS image sensor
 •  When continuously shooting a bright light 
source such as a spotlight, the color filter of 
the MOS image sensor may have deteriorat-
ed and it may cause discoloration. Even 
when changing the fixed shooting direction 
after continuously shooting a spotlight for a 
certain period, the discoloration may remain. 
 •  When  shooting  fast-moving  subjects  or
performing panning/tilting operations, 
objects crossing the shooting area may 
look to be bending askew. 
Indication label
Refer to the indication label on the back of this 
product for the equipment classification and 
power source, etc.
What to do if “WARMING UP-PLEASE 
WAIT” appears on the display.
This message indicates that the temperature 
inside the camera has become extremely low.
In such a case, wait until the temperature inside 
the camera goes up (around 2 hours or more in 
low temperatures below -20 ºC {-4 ºF}), and 
then turn on the power again.
Mount bracket (accessory) 
SW458
Do not use the mount bracket (accessory) 
when mounting the camera on a vehicle.
AVC Patent Portfolio License
THIS PRODUCT IS LICENSED UNDER THE 
AVC PATENT PORTFOLIO LICENSE FOR THE 
PERSONAL USE OF A CONSUMER OR 
OTHER USES IN WHICH IT DOES NOT 
RECEIVE REMUNERATION TO (i) ENCODE 
VIDEO IN COMPLIANCE WITH THE AVC 
STANDARD (“AVC VIDEO”) AND/OR (ii) 
DECODE AVC VIDEO THAT WAS ENCODED 
BY A CONSUMER ENGAGED IN A 
PERSONAL ACTIVITY AND/OR WAS 
OBTAINED FROM A VIDEO PROVIDER 
LICENSED TO PROVIDE AVC VIDEO. NO 
LICENSE IS GRANTED OR SHALL BE 
IMPLIED FOR ANY OTHER USE. ADDITIONAL 
INFORMATION MAY BE OBTAINED FROM 
MPEG LA, L.L.C.
SEE HTTP://WWW.MPEGLA.COM
About the dehumidifying device
 •  This  product  has  dehumidifying  device  to
keep the inside at low moisture level, pre-
venting condensation and quickly dissipat-
ing dew if produced. 
 •  Dew may be produced depending on the 
conditions of temperature, humidity, winds, 
and rain, and it may take time to dehumidify. 
 •  Never seal the surfaces of the dehumidify-
ing device. 
Dehumidifying device