Panasonic BB-HCM371A User Manual
Operating Instructions
[For assistance, please call: 1-800-272-7033] 115
2.25 Controlling External Output Terminal
The digital output terminal allows you to control the external devices. You can
change the initial status of the output signal.
change the initial status of the output signal.
1.
Click [External Output] on the Setup page.
2.
Click [Save] when finished.
•
Clicking [Cancel] cancels your settings without saving changes.
•
New settings are saved.
•
When finished, "Success!" is displayed.
3.
Click [Go to External Output Control page].
•
The External Output Control page is displayed.
Setting
Description
External Device
Control Output
Control Output
•
If you check [Open], the internal transistor turns off and the
external output terminal gets high impedance (open
collector) when the camera powers up. If you check [Short
to GND], the internal transistor turns on and is electrically
short-circuited to GND pin when the camera powers up.
The external output terminal gets low impedance (0 V).
external output terminal gets high impedance (open
collector) when the camera powers up. If you check [Short
to GND], the internal transistor turns on and is electrically
short-circuited to GND pin when the camera powers up.
The external output terminal gets low impedance (0 V).
Button name
modification
modification
•
You can change the output control button names on the
operation bar. You can name the button depending on your
external devices.
operation bar. You can name the button depending on your
external devices.