Panasonic WV-SW598 User Manual

•

Power source:

24 V AC±15 %, PoE+ device (IEEE802.3at compliant) or Tested PoE injector (60 W)

Power consumption:

AC power supply: 

24 V AC (50 Hz/ 60 Hz)/ 3.5 A/ 55 W

Tested Power over Ethernet (Injector: 60 W): 54 V DC/ Approx. 1.0 A/ 50 W
PoE+ device: 

54 V DC/ Approx. 470 mA/ 25 W (Class 4 device) 

Standby power *

1

:

AC power supply: 

24 V AC (50 Hz/ 60 Hz)/ 720 mA/ 10 W

Tested Power over Ethernet (Injector: 60 W): 54 V DC/ Approx. 175 mA/ 9.5 W
PoE+ device: 

54 V DC/ Approx. 165 mA/ 9.0 W (Class 4 device)

Ambient operating temperature:

–50 °C to +55 °C {–58 °F to +131 °F} (24 V AC/ Tested PoE injector (60 W)) *

2

–30 °C to +55 °C {–22 °F to +131 °F} (PoE+ device)
(During start-up: –30 °C to +55 °C {–22 °F to +131 °F}
                          (24 V AC/ PoE+ device/ Tested PoE injector (60 W))*

2

)

Ambient operating humidity:

Less than 90 % (no condensation)

Storage temperature:

–50 °C to +70 °C {–58 °F to +158 °F}

Storage humidity:

Less than 95 % (no condensation)

Monitor output (for adjustment):

VBS: 1.0 V [p-p]/75 Ω, composite (BNC)

External I/O terminals:

ALARM IN 1 (BLACK/WHITE IN)/ ALARM IN 2 (ALARM OUT)/ 
ALARM IN 3 (AUX OUT) (x1 each)
BLACK/WHITE IN, ALARM OUT, and AUX OUT can be used by changing the settings 
of Terminal 1, Terminal 2, and Terminal 3.

Microphone/line input: 

ø3.5 mm monaural mini jack
Input impedance: Approx. 2 kΩ (unbalanced)

       For microphone input: 

Applicable microphone: Plug-in power type
Supply voltage: 2.5 V ±0.5 V
Recommended sensitivity of microphone: -48 dB±3 dB (0 dB=1 V/Pa, 1 kHz)

       For line input: 

Input level: Approx. –10 dBV

Audio output:

ø3.5 mm stereo mini jack (monaural output):
Output impedance: Approx. 600 Ω (unbalanced)
External speaker with an amplifier:
Output level: -20 dBV

Water resistance:

IEC60529 (IP66, Against ingress of water with harmful effects powerful jetting)

Heater unit:

Turns on automatically when the inside temperature drops below 10 °C {50 °F}.

Dimensions:

ø229 mm x 357 (H) mm {ø9-1/32 inches x 14-1/16 inches (H)},
diameter of the dome: 160 mm {6-5/16 inches}

Mass:

Main body: Approx. 5.0 k

g {11.02 lbs}

Finish:

Main body: 

Aluminum die cast with glazed melamine coating  

 

(Coating color: Natural silver)

Sunshields*

3

: 

ASA resin coating (Coating color: Natural silver)

Dome cover section:  Clear polycarbonate resin (Rain wash coating)

*1 This is the power consumed when only sending video signals, and when other functions such as pan/tilt, SD recording, 

and the heater are not operated.

*2 When using the camera in low temperature environments, because the heater warms the camera to keep its internal 

temperature above –10 °C {14 °F}, keep the power for the camera always turned on. Perform settings or startup 

operations when the ambient temperature is –30 °C {–22 °F} or higher.

*3 It is impossible to remove the main sunshield.

•

Image sensor:

Approx. 1/3 type MOS image sensor

Effective pixels:

Approx. 2.4 megapixels

Scanning area:

5.38 mm (H) × 3.02 mm (V) {7/32 inches (H) x 1/8 inches (V)}

Scanning system:

Progressive

36