Panasonic WV-ST160 User Manual

Note

•

Panning, tilting and zooming operations can also be carried out on the [Image/Position] tab.

•

Adjusted zoom and focus position for the auto pan function will be applied when [Set] button of “Start
position” is clicked.

[End position]

SW395

SC385

SC384

Move the camera to the desired point to be set as the end point of the auto panning using the control pad/
buttons, and then click the [Set] button to register the position as the end position.

Auto pan

[Dwell time]

Select a dwell time at the start point and the end point from the following.
5s/ 10s/ 20s/ 30s

•

Default: 5s

[Speed]

Select a speed for the auto panning from the following.
3°/s, 4°/s, 5°/s, 7°/s, 10°/s, 13°/s, 18°/s, 24°/s

•

Default: 13°/s

IMPORTANT

•

When “Dwell time” or “Speed” is edited, it is necessary to click the [Set] button to apply them.

Note

•

Even when the selected zoom factor is higher than 36x

SW395

SC385

SC384

/72x

SW396

SC386

, the camera will start panning with 36x

SW395

SC385

SC384

/72x

SW396

SC386

zoom factor.

[Endless panning]

SW396

SC386

The operations for panning can be set to the following
Off: Pan between the left and right end position points.
On(Clockwise): Pans clockwise.
On(Counterclockwise): Pans counterclockwise.
Default: Off

[Zoom] buttons, [Focus] buttons, [Brightness] buttons, Control pad/buttons and [Go] button

Refer to page 12 for descriptions of how to operate these buttons/pad.

[Close] button

Click this button to close the “Auto pan” setup menu.

11.6.6 Configure the settings relating to patrol (“Patrol” setup
menu) (SW396/SC386)

Click the [Setup>>] button of “Patrol” on the [Image/Position] tab of the “Image/Audio” page (

®page 98).

118

Operating Instructions

11 Configure the settings relating to images and audio [Image/Audio]