Panasonic WV-ST160 User Manual

To invalidate the VMD area, click the [Set] button after selecting “Off” for “Status” of the VMD area to be
invalidated.

→

The outline of the invalidated VMD area will turn to a dotted line. When the VMD area is invalidated,
no alarm will occur even when a motion can be recognized in the area.

To delete the VMD area, click the [Delete] button corresponding to the area to be deleted.

→

The outline of the respective VMD area will disappear.

Click the [Set] button.

→

The edited settings will be applied.

Click the [Back] button to return to the screen to select a preset position.

Click the [Notification] tab on the “Alarm” page. (

®page 47, page 49)

The settings relating to the alarm mail can be configured. It is necessary to configure the settings of the mail
server to perform the mail notification. (

When “Mail server >>” is clicked, the [Mail] tab of the “Server” page will be displayed. (

Select “On” or “Off” to determine whether or not to provide notification by e-mail according to the settings for
the “Alarm” and “Diag.” checkboxes of “Destination of notification” below.

–

When an alarm is detected (“Alarm”)

SW396

SW396

 

SW395

SW395

 

SC386

SC386

 

SC385

SC385

 

SC384

SC384

 

SW175

SW175

 

SW172

SW172

 

ST165

ST165

 

ST162

ST162

:

Operating Instructions

147