Panasonic WV-SW458E User Manual

17

When installing the camera on a ceiling or a wall, there are 3 methods as specified below.
 •  Using a two-gang junction box (

☞

 pages 18 and 19)

 •  Installing the camera directly on the ceiling or wall

SW458M

 (

☞

 page 19)

 •  Using the supplied mount bracket

SW458

 (

☞

 pages 20 to 23)

 •  Procure  4  screws  (M4)  to  secure  the  camera  attachment  (accessory)  or  the  mount  bracket

(accessory) 

SW458

 to a ceiling or a wall according to the material of the installation area. Do 

not use wood screws and nails.

  

For mounting a camera on a concrete ceiling, use an anchor bolt (M4) or an AY plug bolt (M4) 
for securing. (Recommended tightening torque M4: 1.6 N·m {1.18 lbf·ft})

 •  Mount the camera attachment (accessory) in consideration of the camera angle in accordance

with the instructions (

☞

 pages 18 and 19). 

 •  Required pull-out capacity of a single screw/bolt is 196 N {44 lbf} or more.
 •  If a ceiling board such as plaster board is too weak to support the total weight, the area shall

be sufficiently reinforced.

The mounting conditions of the camera are described as follows:

Ceiling/wall

Two-gang junction box

M4

4 pcs.

196 N {44 lbf}

SW458M

 

Ceiling/wall

(Direct mounting)

M4

4 pcs.

196 N {44 lbf}

SW458

Ceiling/wall*

Mount bracket (accessory)  M4

4 pcs.

196 N {44 lbf}

* The conditions for securing the mount bracket to a ceiling or a wall are described here.