Panasonic WV-SW458E User Manual

24

 •  When inserting an SD memory card, make sure the direction.
 •  Before  removing  the  SD  memory  card,  select  “Not  use”  for  “SD  memory  card”  on  the  

[SD memory card] tab of the “Basic” page first. Turn off the power after “Not use” selection, 
and then unload the SD memory card. When the SD memory card is inserted or removed with 
the power on, data in the SD memory card may be damaged. (

☞

  Operating Instructions 

(included in the CD-ROM))

z

  Loosen the SD memory card slot cover fixing screw 

using the bit for tamperproof screw (accessory), then 
open the SD memory card slot cover.

x

  Insert an SD memory card fully into the SD memory card 

slot until a click is heard.

c

  Close the SD memory card slot cover, and tighten the SD 

memory card slot fixing screw to secure the cover. 
(Recommended tightening torque: 0.78 N·m {0.58 lbf·ft})

• Ensure that the SD memory card slot cover's fixing

screw is firmly secured. 
Failure to observe this may cause water leakage or 
malfunction.

v

  When removing the SD memory card, push in 

the SD memory card until a click is heard after 
executing step 1, then pull it out from the SD 
memory card slot. After removing the SD mem-
ory card, close the SD memory card slot cover, 
and tighten the SD memory card slot cover fix-
ing screw to secure the cover.

(Recommended tightening torque: 0.78 N·m {0.58 lbf·ft})

SD memory card slot cover fixing screw

SD memory card slot cover

SD memory card slot

Label face upward