Panasonic WV-SW458E User Manual
30
Camera mounting
Installation shall be conducted after turning off each device.
z
Attach the camera attachment (accessory) on the ceiling or wall.
<Using a two-gang junction box>
Secure the camera attachment (accessory) to the two-gang junction box (locally procured). (☞ Pages 18 and 19)
<Installing the camera directly on the ceiling or wall>
Secure the camera attachment (accessory) to the two-gang junction box (locally procured). (☞ Pages 18 and 19)
<Installing the camera directly on the ceiling or wall>
SW458M
Attach the camera attachment (accessory) using the installation template label (accessory). (☞ Page 19)
x
Connect each cable. (
☞
Page 25) Waterproof the connecting portion. (
☞
Page 28)
c
Align the “OPEN” on the camera with the projection of the camera attachment (accessory).
v
Engage the camera attachment fixing screws on the rear of the camera in the camera mounting
holes of the camera attachment (accessory), and then rotate the camera in the direction of the arrow
to secure the camera attachment and camera while storing the cables in the rear of the camera.
Rotate the camera until a click is heard so that the projection of the camera attachment (acces-
sory) will be set to the “LOCK” position.
to secure the camera attachment and camera while storing the cables in the rear of the camera.
Rotate the camera until a click is heard so that the projection of the camera attachment (acces-
sory) will be set to the “LOCK” position.
b
Secure the camera with the camera fixing screw on the front view.
(Recommended tightening torque: 1.37 N·m {1.01 lbf·ft})
IMPORTANT:
• Ensure that the camera fixing screw is firmly secured.
• Ensure that the camera fixing screw is firmly secured.
Failure to observe this may cause a malfunction or the product to fall, resulting in injury or
accidents.
accidents.
Installation
Camera fixing screw
Camera attachment fixing screw
Projection
Camera mounting hole
<Front view>