Panasonic AK-HRP900P User Manual

Page of 24
4
Outline
Coupling  . . . . . . . . . . . . . . . . . . . . . . .1 pc
Multi-cable . . . . . . . . . . . . . . . . . . . . . .1 pc
Seal  . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc
Setscrews  . . . . . . . . . . . . . . . . . . . . .8 pcs
M4 x 8 mm  . . . . . . . .4 pcs
M5 x 8 mm  . . . . . . . .4 pcs
This unit is a camera controller for multi-purpose camera (AK-HC900P).  This
unit is connected to a multi-purpose camera with one multi-cable, and capable
of transmitting and receiving various camera and lens control signals, analog
picture signals of cameras, and generator lock signals (3-value SYNC).
The extension distance between this unit and the camera is 33 ft (10m) max.
It is possible to control the swivel stand from the pan-tilt control panel AW-
RP301 by using the swivel stand control input connector.
Check the Accessories
Precautions for Use
We recommend that the AC adapter AW-PS505P is used for power supply.
Handle the unit with care.
If dropped or given a strong shock, it may cause a trouble or accident.
Use the unit in a temperature range of 32
o
F to 104
o
F (0
o
C to + 40
o
C).
If used at a temperature below 32
o
F or higher than 104
o
F, it may cause bad influences to
the component parts.
Turn off the power before connecting or disconnecting the cable.
When connecting or disconnecting the cable, be sure to turn off the power switch of the
unit beforehand.
Avoid using the unit outdoors.
Install the unit 3.3 ft (1 m) away from the monitor.
Maintenance
Pull out the power cord plug and clean the unit with dry cloth.  If it is hard to clean,
moisten the cloth with a diluted neutral detergent solution and squeeze it well and lightly
wipe the unit.
Do not use volatile solvents such as benzene or thinner.
When using a chemical mop, carefully read the instructions.
Precautions