Panasonic BL-VP104W User Manual

•

When entering the host name for “SMTP server address” or “POP server address”, it is necessary to
configure the DNS settings on the [Network] tab of the “Network” page. (

[Authentication]
•

Type
Select the authentication method to send E-mails from the following.

–

None: It is not necessary to clear any authentication to send E-mails.

–

POP before SMTP: It is necessary to first clear the POP server authentication to use the SMTP server
to send E-mails.

–

SMTP: It is necessary to clear the SMTP server authentication to send E-mails.

–

Default: None

•

When you don’t know the authentication method to send E-mails, refer to the network administrator.

•

User name
Enter the user name to access the server.

–

Available number of characters: 0 - 32 characters

–

Unavailable characters: " & : ; \

•

Password
Enter the password to access the server.

–

Available number of characters: 0 - 32 characters

–

Unavailable characters: " &

Enter the E-mail address of a sender.
The entered E-mail address will be displayed in the “From” (sender) line of the sent E-mails.

•

Available number of characters: 3 - 128 characters

•

Available characters: Alphanumeric characters, the at sign (@), the period (.), the underscore (_), and
the hyphen (-).

Click the [FTP] tab on the “Server” page. (

®page 34, page 35)

The settings relating to the FTP server used to transmit the alarm images can be configured on this page.

100

Operating Instructions