Panasonic BL-VP104W User Manual
15.4.6 When using “Dynamic DNS Update(DHCP)”
[Host name]
Enter the host name to be used for the Dynamic DNS Update service.
•
Available number of characters: 3 - 250 characters
Enter in the form of “(host name). (domain name)”.
Enter in the form of “(host name). (domain name)”.
•
Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the
hyphen (-).
hyphen (-).
•
Default: None (blank)
Note
•
Refer to the network administrator for further information about the available host names.
15.5 Configure the settings relating to SNMP
[SNMP]
[SNMP]
Click the [SNMP] tab on the “Network” page. (
The settings relating to SNMP can be configured on this page. It is possible to check the status of the camera
by connecting to the SNMP manager. When using the SNMP function, contact the network administrator.
by connecting to the SNMP manager. When using the SNMP function, contact the network administrator.
[Community]
Enter the community name to be monitored.
•
Available number of characters: 0 - 32 characters
•
Default: None (blank)
IMPORTANT
•
When using the SNMP function, it is necessary to enter the community name. When no community
name is entered, the SNMP function will not work.
name is entered, the SNMP function will not work.
[System name]
Enter a system name to be used to manage the camera with the SNMP function.
134
Operating Instructions
15 Configuring the network settings [Network]