Panasonic BL-VP104W User Manual

Click the [JPEG/H.264] tab on the “Image/Audio” page. (

®page 34, page 35)

Configure the settings such as “Refresh interval (JPEG)*”, “Image capture size” and “Image quality” on this
section. Refer to page 49 for further information about the settings relating to H.264 images.

Configure the settings relating to the JPEG images displayed on the “Live” page.

Select an interval to refresh the displayed JPEG image from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/ 6fps*/ 10fps*/ 12fps*/ 15fps*/ 30fps*

•

Default: 30fps*

•

When “H.264 transmission” is operating, the refresh interval may be longer than the set value when
any value with an asterisk (*) on the right is selected.

•

Depending on factors such as the network environment, the resolution, the image quality, or the number
of computers concurrently accessing the camera, the transmission interval may be longer than the set
value.

•

If images are not delivered in the specified transmission interval, you can make the images be delivered
closer to the specified time by lowering the resolution or image quality.

Select the image capture size to display the JPEG image on the “Live” page for the first time.
When “4:3” is selected for “Aspect ratio”

VT164W

VT164W

 

VT164

VT164

 

VP104W

VP104W

 

VP104

VP104

:

QVGA/ VGA/ 800x600

VP101

VP101

:

QVGA/ VGA
When “16:9” is selected for “Aspect ratio”

VT164W

VT164W

 

VT164

VT164

 

VP104W

VP104W

 

VP104

VP104

:

320x180/ 640x360/ 1280x720

Operating Instructions

47