Pelco CLCLD5HDPG-1 Leaflet

The following are lower domes for the Heavy-Duty Spectra and feature tamper-resistant hardware
and an aluminum trim ring.

CLCLD5HDF-1

Standard clear dome for the CC5BCBW-HF1 Heavy-Duty Spectra system

CLCLD5HDBF-1

Heavy-Duty clear dome for the CC5BCBW-HBF1 Heavy-Duty Spectra system

CLCLD5HDPG-1

Standard clear dome for the CC5BCBW-HP Heavy-Duty Spectra system

LD5HDPG-1

Heavy-Duty clear dome for the CC5BCBW-HBF1 Heavy-Duty Spectra system

Refer to Figure 1.

1.

Lightly apply O-ring lubricant to the
O-ring. Install the O-ring in the groove
on the trim ring of the lower dome.

2.

Attach the back box trim leash to a re-
tainer screw inside the lower dome.

3.

Environmental Models Only – Plug the
two-pin heater connection in the lower
dome into the mating connector in the
back box.

4.

Align barrel locks in lower dome with the
holes located on each side of the back
box. Push the lower dome onto the back
box. Press the center pins of the barrel
locks in to secure the lower dome.

Refer to Figure 2.

1.

Attach the back box trim leash to one of
the 8-32 x .275-inch screws that secure
the back box to the mounting ring.

2.

Align ball studs (located on the mount
ring) with the ball stud receivers (located
on the inside of the lower dome).

3.

Place the lower dome over the back
box.

4.

Push the lower dome over the back
box, line up the mounting screw
holes. Use the tamper-resistant
screws and the tool bit  supplied with
the ceiling panel (CLCD5-P), and
attach the lower dome to the back
box.

Clean the acrylic dome as needed. Be careful not to scratch the surface of the dome. Use a non-
abrasive cleaning cloth and agent that is safe for acrylic plastic.

Figure 1.  Lower Dome Installation,

   Pendant Models

Figure 2.  Lower Dome Installation,

     In-Ceiling Models

TRIM
LEASH

O-RING

BARREL
LOCK

00994

3500 Pelco Way
Clovis, CA 93612-5699
USA

In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150

International Customers:
Tel +1(559) 292-1981
FAX +1(559) 348-1120