Pelco 207 User Manual

C1002RN (1/09)

Page 1 of 4

Integral Digital Sentry

®

 digital video management systems (DVMS) support certain 

Axis

®

 IP camera models. The camera models listed in this document can be used with 

Digital Sentry IP camera driver 6.8.0.126 and later. Refer to each camera’s 

table for information about the hardware and software features validated for use on a 

Digital Sentry system. Any general limitations or special instructions are listed at the 

beginning of the document, and any model-specific information is listed after each table. 

For information about the general usage of each camera, refer to the camera 

manufacturer’s documentation.

A single AXIS driver in DSAdmin controls all supported AXIS cameras.

To obtain the latest IP camera driver or documentation for use with Digital Sentry, refer 

to the Pelco Web site at 

www.pelco.com

.

Firmware

N/A

Supported Resolutions

640 x 480 maximum

Frames per Second (FPS)

1 to 30

Number of Quality Settings

10

Supported Codec

MJPEG

Supported Motion Detection Integral, In-Camera
Pan/Tilt/Zoom (PTZ)

Not available

Release Notes