VIVOTEK MD8562 User Manual

 

 

The focus of this network camera is set from 1.0m to infinity by factory default. If you want to 

focus on objects closer than 1.0m or the lens has lost focus, please fine tune it in the following 

way.

1. Loosen the lens lock screw under the lens module.

2. Manually rotate the lens to fine-tune the focus until the live image is clear.

3. Tighten the lens lock screw.

Tear down the aluminum foil vacuum bag and take out the moisture absorber. Attach the 

supplied moisture absorber to the inner side of the dome cover. (Please replace the absorber 

whenever you open the dome cover.)

Attach the dome cover to camera. Secure the dome screws with the supplied screwdriver. 

Finally, make sure all parts of the camera are securely installed.

Tighten the lens lock screw.

Please secure the screws 

tightly to avoid moisture.