3com DSA-3CV1100-02 User Manual
52
M
ANAGING
THE
VCN A
CCESS
C
ONCENTRATOR
2 Connect the LMA port to the PC serial port (COM1 or 2) with the cable
provided.
3 Plug the end of the cable with the four-pin MiniDIN connector into one of
the 24 VCN AC LMA ports. For central management or to manage the
first port, plug the MiniDIN into port LMA port 1. To locally manage
another port, plug the MiniDIN into the LMA connector of that port.
first port, plug the MiniDIN into port LMA port 1. To locally manage
another port, plug the MiniDIN into the LMA connector of that port.
Line Card
Management
Management
This section describes local management.
All lower level menus are accessed by selecting a menu item from the
menu you are viewing and typing the item number. You return to the
previous menu, the higher level menu, by typing
menu you are viewing and typing the item number. You return to the
previous menu, the higher level menu, by typing
0
(zero) and pressing
<Enter>.
Local Menus
In this section you will find information on how to monitor and control an
LC through its LMA port.
LC through its LMA port.
In most menus, except where indicated, the option labeled
0
is for
returning to a higher level menu (
).
Figure 26 Return to Previous Menu Option
Login
After connecting the management terminal to one of the LMA ports 2
through 24, press any key. The login dialog appears:
through 24, press any key. The login dialog appears:
Login:
Type your Login ID and press <Enter>.
Password:
Type your password and press <Enter>.
The default login is
admin
; the default password is null—just press
<Enter>.
If you make a mistake in your Login ID, an error message appears:
Login incorrect
0. Return to previous menu