JVC VN-685U User Manual
29
3
Connecting the alarm cable (
Connect the alarm cable and wind the
waterproof tape (adhesive).
After connecting, push the cable into the arm of
the camera.
waterproof tape (adhesive).
After connecting, push the cable into the arm of
the camera.
Note:
● For cables that are not used, be sure to wrap
the ends individually with insulating tape.
● For safety reasons, turn on the power only
after all the connection is complete.
4
Mount the cap
5
Seal the cable connection hole and
around the mounting surface of the
camera with waterproof seal (GE
silicon).
around the mounting surface of the
camera with waterproof seal (GE
silicon).
Note:
● Ensure that waterproof treatment is
performed. Otherwise, the camera may
malfunction due to rain water seepage.
malfunction due to rain water seepage.
● Use GE silicon or other similar product for the
sealing material.
6
Remove the dome cover protective
sheet
sheet
Wind the waterproof tape
(adhesive)
(adhesive)
Arm
4
5
Waterproof
treatment
treatment
Cap
Protective
sheet
sheet