VIVOTEK FD7141(V) User Manual

 

 

 

 

First, use a screwdriver to loose the three screws and detach the dome cover from the camera 

base� Then, follow the steps below to install the camera to either a ceiling or a wall�

Ceiling mount with the bottom base
1� Attach the supplied alignment sticker to the ceiling� 
2� Using the 10 circles on the sticker, drill 2 pilot holes symmetrically on each side into the ceil-

ing� Then hammer the four supplied plastic anchors into the holes�

3� Through the four holes on the bottom base, insert the four supplied screws into the corre-

sponding holes and secure the bottom base with a screwdriver� 

4� Feed the cables through hole A or B� If you want to use hole B, remove the rubber stopper 

with a screwdriver�

5� Secure the camera base to the bottom base with three supplied screws�

A

B