ZyXEL Communications 3.1 User Manual

 Chapter 22 IDP Commands

ZyWALL (ZLD) CLI Reference Guide

In this example we rename an IDP signature profile from “old_profile” to “new_profile”, delete the 
“bye_profile” and show all base profiles available.

Use the following rules to apply IDP profiles to specific directions of packet travel. 

Router# configure terminal

Router(config)# idp rename signature

 

old_profile new_profile

Router(config)# no idp signature bye_profile

Router(config)# show idp signature base profile

No.  Base Profile Name

==============================================================

1    none

2    all

3    wan

4    lan

5    dmz

Router(config)#

IDP Zone to Zone Rule Commands

idp {signature| anomaly } rule { append | 

<1..32> | insert <1..32> }

Create an IDP signature or anomaly rule and enter the sub-command 
mode.

bind profile

Binds the IDP profile to the entry’s traffic direction.

no bind

Removes the IDP profile’s binding.

[no] from-zone zone_profile

Specifies the zone the traffic is coming from. The no command removes 
the zone specification.

[no] to-zone zone_profile

Specifies the zone the traffic is going to. The no command removes the 
zone specification.

[no] activate

Turns on the IDP profile to traffic direction binding. The no command 
turns it off.

idp {signature| anomaly } rule { delete 

<1..32> | move <1..32> to <1..32> }

Remove or move an IDP profile to traffic direction entry.

no idp {signature| anomaly } rule <1..32>

Removes an IDP profile to traffic direction entry.

show idp {signature| anomaly } rules

Displays the IDP zone to zone rules.