ZyXEL Communications 3.1 User Manual

Chapter 27 Addresses

ZyWALL (ZLD) CLI Reference Guide

The following sections list the address object and address group commands.

This table lists the commands for address objects.

address-object and address6-object Commands

show {address-object | address6-object | 

service-object | schedule-object} 

[object_name]

Displays information about the specified object or all the objects of 
the specified type.

address-object object_name {ip | ip_range | 

ip_subnet | interface-ip | interface-subnet | 

interface-gateway} {interface}

Creates the specified IPv4 address object using the specified 
parameters.

: <1..255>.<0..255>.<0..255>.<1..255>-

<1..255>.<0..255>.<0..255>.<1..255>

: <1..255>.<0..255>.<0..255>.<0..255>/<1..32>

: Specify an interface when you create an object based 

on an interface.

no address-object object_name

Deletes the specified address object.

address-object rename object_name object_name

Renames the specified address (first object_name) to the second 
object_name

.

[no] address6-object object_name 

{ipv6_address | ipv6_range | ipv6_subnet}

Creates the specified IPv6 address object using the specified 
parameters. The no command removes the specified address object.

: IPv6 address

: IPv6 address range. For example: fe80:1234::1-

fe80:1234::ffff

: IPv6 prefix format. For example: 

fe80::211:85ff:fe0e:dec/128

[no] address6-object object_name interface-ip 

interface {dhcpv6 | link-local | slaac | 

static} {addr_index} 

Creates the specified IPv6 address object based on the specified 
interface object. Specify whether it is a DHCPv6 server, link-local IP 
address, StateLess Address Auto Configuration IP address (slaac), 
or static IPv6 address. The no command removes the specified 
address object.

[no] address6-object object_name interface-

subnet interface {dhcpv6 | slaac | static} 

{addr_index} 

Creates the specified IPv6 address object based on the specified 
interface subnet object. Specify whether it is a DHCPv6 server, 
SLAAC, or static IPv6 address. The no command removes the 
specified address object.

[no]adderss6-object object_name interface-

gateway interface { slaac | static} 

{addr_index} 

Creates the specified IPv6 address object based on the specified 
interface gateway object. Specify whether it is a SLAAC or static 
IPv6 address.  The no command removes the specified address 
object.