Canon VB-H710F User Manual

Log Viewer

115

Adm

in T
ools

„ Saving a Log to a File/Opening a Saved Log

Click [Save to local file] and save using the [Save As] 

dialog box.

Click [Open local file] and select a log file using the 

[Open] dialog box.

„ Copying/Searching Logs

Click to select the log you want to copy, and then click 

[Copy].

Enter the character string for which you want to search in 

[Search for] and click [Search].

If the searched log is found, it is shown as selected. 

Click [Previous] or [Next] to search the log above or 

below. Lines of logs found are shown as selected.

„ Showing All Logs

Select the [Show all logs] checkbox.

When selected, even logs without a log code are shown if 

[Not specified] is selected for the log type [Filter].

„ Showing Filtered Logs

You can filter logs by type, code and date & time to show 

only the necessary information. 

Set the following conditions and click [Apply filter] to show 

only the logs matching the specified conditions.

[Log Type] 

Select the [Specify type] or [Specify code] checkbox to 

filter logs by type. If you do not want to filter logs by type, 

select [Not specified]. 

Specify the log level
Select [Error], [Warning] or [Information] for the level of 

logs to be shown. 

Specify log output module
Select [Application], [HTTP Server] or [System] for the 

output source module whose logs will be displayed. 

Specify the log code. Only logs whose code contains 

the entered characters are shown. If “A0” is entered, 

for example, logs starting with “A0” are displayed. 

[Date & Time] 

• [Specify start date & time] 

When this checkbox is selected and a date and time 

are entered, logs generated on or after the specified 

date and time are shown.

• [Specify end date & time] 

When this checkbox is selected and a date and time 

are entered, logs generated on or before the specified 

date and time are shown.

[Application], [HTTP Server], and [System] support the List of 
Log Messages (p. 151).

Logs saved in the camera's internal memory are cleared when 

you perform [Maintenance] > [Restore Settings] and [Reboot], 
or press the reset switch on the camera.